Détails du produit

‹‹ Retour

IPS Weld-On #3 Clear, 4oz

IPS Weld-On #3 Clear, 4oz

Voulez-vous acheter en ligne?

Si vous êtes un revendeur agréé, veuillez vous se connecter. Si non vous pourriez

devenir revendeur ou AutoMobility trouvera un détaillant le plus près de chez vous
MOBILE SOLUTIONS PF-10799
IPS Weld-On #3 Clear, 4oz

Use Weld-On (water consistency) acrylic cement for joining acrylic plastics, particularly when laminating multiple colored plastics together.



Materials Needed:

Weld-On #3 solvent cement
Applicator (hypodermic needle, fine brush, or other suitable applicator)
Clean, lint-free cloth or paper towel
Clamps or weights (if needed for holding parts together)


Safety Precautions:

Ventilation: Ensure you are working in a well-ventilated area or use appropriate ventilation equipment.
Protective Gear: Wear safety glasses and chemical-resistant gloves.
Fire Safety: Keep away from open flames and sources of ignition, as the solvent is highly flammable.


Preparation:

Clean Surfaces: Ensure the surfaces to be bonded are clean, dry, and free of dust, grease, and other contaminants. Use a clean, lint-free cloth or paper towel to wipe the surfaces.
Fit and Position: Dry-fit the pieces to be bonded to ensure proper alignment and fit.


Application:

Positioning: Place the pieces to be bonded in the desired position. If necessary, use clamps or weights to hold them in place.
Applying Solvent Cement:
Using the applicator, apply a thin, even layer of Weld-On #3 to one of the surfaces to be bonded.
For thin materials, apply the solvent along the edge where the parts meet (capillary action will draw the solvent into the joint).
Assembling: Quickly and carefully bring the two pieces together. Ensure they are properly aligned, as the bond forms rapidly.
Holding: Hold the pieces together for a few seconds to allow the initial bond to form. If needed, use clamps or weights to keep the pieces in place during the curing process.


Curing:

Initial Set: The initial bond will form within a few minutes. Handle the bonded pieces with care during this time.
Full Cure: Allow the bond to cure fully for 24-48 hours to achieve maximum strength.


Clean-Up:

Tools and Applicators: Clean the applicator and any tools used with an appropriate solvent, such as acetone, immediately after use.
Work Area: Ensure the work area is clean and free of any spilled solvent or debris.


Additional Tips:

Store Weld-On #3 in a cool, dry place, and keep the container tightly closed when not in use.
By following these directions, you should achieve a strong, clear bond with Weld-On #3 solvent cement.
No data found

Customer Reviews

4.5

Rate & Review this product

Tell others about your experience with this product.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

Mobies

from Markham, ON
Mar 21, 2017

Review title

Bought this monitor and returned it the same day because although I have an Nvidia GTX 560 video card, it was not powerful enough to scale resolution up to 4k HD. With the video card I have I was unable to go higher than 1080p !! So, before you buy this monitor, please sure you have the right video card with HDMI 2.0 and/or a Display port.

fréquemment achetés ensemble